5 mins to read
How to Reduce Your Expenses
As a fleet owner, your day-to-day costs can quickly add up. What you don’t know is there are further hidden, expensive...
Read moreEven the most skilled drivers have faced situations where they needed to slam on the brakes to avoid an accident. In moments like these, a vehicle's wheels can lock up, causing it to lose traction, skid or even spin out of control, making it difficult for the driver to steer safely.
An anti-lock braking system, also called “anti-skid braking systems,” anti-lock brakes” or ABS, addresses this challenge. This system plays a critical role in helping drivers avoid crashes or reduce their damage potential.
A meta-analysis of research studies shows “that ABS gives a relatively small, but statistically significant reduction in the number of crashes, when all levels of severity and types of crashes are taken together” (1).However, “while injury crashes decrease (-5%), fatal crashes increase (+6%)” (2).
This article will explore how ABS works, its different types and how it can improve fleet safety.
What is ABS?
Since 2004, ABS are required and since 2016 are mandatory on all new scooters, motorcycles, tricycles (3). Anti-lock braking systems are designed to help drivers maintain control when braking in emergencies. By rapidly “pumping” the brakes, the ABS keeps the wheels from locking up and allows the driver to steer to safety while stopping. Additionally, ABS has been shown to reduce stopping distance for vehicles traveling in normal conditions.
How does ABS work?
ABS relies on a system of sensors, pumps, valves and controllers that monitor and adjust brake pressure to prevent wheel lock-up:
- Speed sensors: Located on each wheel, these sensors monitor the speed at which the wheels rotate.
- Valves: Positioned in the brake lines, they regulate brake pressure by opening, closing or releasing as needed.
- Pump: This restores pressure to the brake system when needed, using hydraulic fluid to keep brakes working effectively.
- Controller: Receives data from the sensors and determines when to adjust braking pressure to prevent wheel lock-up.
Working together, this system creates the quick pumping effect that prevents lock-up and allows steering during emergency braking.
Looking for help to enable a safer tomorrow? See the 5 ways to focus on safety with GPS fleet tracking.
Different Types of ABS
Not all ABS systems are the same. While four-wheel ABS is common in passenger vehicles, other types are better suited to specific vehicle categories:
- Four-wheel ABS: Found in most cars, minivans and light trucks, four-wheel ABS allows the driver to maintain steering control in emergency braking situations by preventing all four wheels from locking up.
- Rear-wheel ABS: Commonly found in some pickup trucks, vans and SUVs, real-wheel ABS is designed to prevent the rear wheels from locking, which helps reduce the risk of the vehicle skidding or spinning out.
How ABS can help with fleet safety
For fleet managers, ABS is an essential feature that can help prevent accidents and reduce maintenance costs by minimizing the risks associated with emergency braking. There are several ways ABS contributes to fleet safety and efficiency:
- Accident reduction: ABS reduces the chance of skidding and allows the driver to maintain control during emergency stops, allowing drivers to safely maneuver away from danger. It can also reduce stopping times under the right conditions.
- Fleet reliability: With fewer skidding incidents and less stress on the braking system, ABS contributes to better overall vehicle health, helping to reduce maintenance needs and associated costs. Routine maintenance is essential for keeping ABS and other vehicle systems in top condition and supporting fleet safety. ABS warning lamps must function properly, as a malfunctioning lamp can indicate an ABS failure or other issue.
- Fleet management software that offers vehicle maintenance capabilities can be highly beneficial. According to the 2025 Verizon Fleet Technology Trends Report Europe [LINK TK], fleets implementing such technologies see a 16% decrease in vehicle maintenance costs and a 19% reduction in accident-related expenses.
- Compliance and inspections: Brakes are one of the most vital components to safe vehicle operation. They are also among the most commonly cited reasons for vehicles being fined or placed out of service during inspections, according to the European Commission.
- In fact, in the latest technical roadside inspection of the roadworthiness of Commercial vehicles circulating in the Community, they reported that 15% of the commercial vehicles placed out of roadside inspections showed brake-related violations (4).
- Fleet managers can help avoid these outcomes by conducting daily vehicle inspections to track maintenance needs efficiently. For example, regular checks of tire pressure, brake linings, and brake fluid can help prevent ABS failures.
While ABS does impact safety, it’s not a fail-safe method of crash prevention. In fact, under certain road conditions like gravel or snow, studies have shown that ABS can actually increase stopping times, according to research (5)
That’s why it’s still critical to train and coach drivers to follow safe driving behaviors, such as maintaining proper following distances of a minimum of three seconds between their vehicle and the one in front, following speed limits and driving cautiously when weather and road conditions are poor.Fleet management technology can empower managers to educate drivers and implement safe driving habits by monitoring their driver behaviour.
By reducing skidding, preventing wheel lock-up, and allowing drivers to maintain control in emergencies, ABS helps to improve safety, reduce maintenance costs, and enhance fleet efficiency. To further promote fleet safety, consider using fleet management software to track ABS maintenance, monitor driver behavior and stay on top of preventive maintenance.
For a closer look at how fleet management software can enhance your fleet’s safety and efficiency, consider booking a demo today.
Sources: